Reference Information
Modem Reference Information
Modem Reference Information
Note
Command
A
A/
Dn
E0
E1
H0
H1
I0
I1
I2
I3
I4
I5
I6
I7
I8
I9
Ln
If your computer has a modem port, you can customize the operation of the modem using AT commands and
You should have a good understanding of modems and how they operate before you change default settings.
This section contains summary information about AT commands,
Modem Reference (Conexant)
All listed AT commands must be preceded by the characters “AT” (except for the command “A/”). The commands can be entered in upper or lower case. Many commands can be used as queries by entering “?” as the argument.
AT Commands (Conexant)
Function (Conexant)
Go
Dial modifier:
Turn off command echo.
Turn on command echo (default).
Initiate
If
Report product code.
Report LSB of stored checksum.
Report “OK”.
Report identification codes.
Report product description.
Report country code parameter.
Report modem data pump model and internal code revision.
Report modem data pump model and internal code revision.
Report “OK”.
Report country.
Set speaker volume: 0=off, 1=low (default), 2=medium, 3=high.