
Periodic Maintenance Procedures
Each paper source has a Paper Pickup Roller that should be replaced when paper no longer feeds reliably. The MP Tray (Tray
1)Paper Pickup Roller is shown in Figure
2)Pickup Roller is shown in Figure
Removing the MP Tray (Tray 1) Pickup Roller and Separation Pad
Figure
To remove and replace the MP (Tray 1) Pickup Roller and Separation Pad, follow the steps below.
1 Turn OFF and unplug the printer.
2 Remove the MP Tray (Tray 1) inner black plastic cover.
3 Remove the roller by pinching the plastic retaining clip at the side of the roller and sliding it off its shaft (see Figure
Preventive Maintenance