Removing the Transfer Roller
1 Turn OFF and unplug the printer.
2Open the printer’s top cover.
3Remove the Toner Cartridge.
4Use the hook inside the top cover to remove the Transfer Roller as follows. Hook the left side of the chrome rod beside the sponge roller, and lift the roller out.
5Discard the used roller.
Replacing the Transfer Roller
1 Slide the right end of the new roller (the end without the gear), onto the right slot. Press the rod into the slot.
2 Lower the gear end of the roller into place.
3 Install the toner cartridge.
4 Replace the hook tool.
5 Close the top cover.
6 Plug in the power cord and switch the printer ON.