Figure A-21 Holding Tray Gears and Belt

6 Remove the (1) one-way gear shown in Figure A-21, callout 1.

N o t e

The one-way gear must be reassembled correctly.

 

With the gear on the shaft, turn the gear

 

clockwise. The shaft should move the belt.

 

Turning the gear counter clockwise should result

 

in no movement of the shaft and belt.

7 Remove the (1) E-clip from behind the first gear (see Figure A-21, callout 2).

8 Remove the (2) gears shown in Figure A-21, callouts 3 and 4. 9 Slip the belt off the gears.

N o t e

Verify proper wire routing when reassembling.

Duplexer A -25