Removing the PC (Tray 2) Pickup Roller

The PC Pickup Roller is underneath the printer (see Figure 4-7). To remove the Pickup Roller:

1 Turn OFF and unplug the power cord from the rear of the printer. If your interface cable is long enough, it may stay attached, if not, remove it also.

2 Remove the Toner Cartridge and the PC tray (Tray 2).

3 Lay the printer on its left side.

4 Remove the PC (Tray 2) Pickup Roller by pinching the release clips and sliding the roller off the shaft.

Figure 4-7 Removing the PC (Tray 2) Pickup Roller (printer is turned on its left side)

Preventive Maintenance 4-13