Sensor PCA Removal

Figure 6-50 Sensor PCA Removal

1 Remove the Right, Left, Top, and Font Door covers. You need not remove the MP Tray.

2 Perform the Paper Control PCA removal procedure, as shown in the preceding section.

3 Disconnect the connectors for SL1, SL2, and M2 from the left end of the Sensor PCA.

4 Release the (3) clips that hold the Sensor PCA cover. Remove the cover (see Figure 6-50, callout 1).

5 Remove the Sensor PCA by sliding it to the left and dropping it down.

6-60 Removal and Replacement