Lower Cassette Pickup Motor Removal

Figure 1-38 Lower Cassette Upper Front Cover

1 Open the sensor cover and disconnect the center and rear connectors (see Figure 6-37, callout 2).

2 Release the (2) tabs that hold the Upper Front Cover (access the tabs through the slots with a small screwdriver - see Figure 6-38 callout 1). Remove the cover by rotating it toward the front.

3 Remove the (2) screws from the front and rear left side (see Figure 6-38 callout 2).

4 Remove the cables from the race channel at the front of the Lower Cassette Base (see Figure 6-37).

N o t e

Note how the cables are routed in the the cable

 

race. Be careful not to damage the cables during

 

reassembly.

(continued on next page)

6-45 Removal and Replacement