Formatter Cage Removal

Figure 6-24a Formatter Cage Screws (Right Side View -

 

LaserJet 4 and 5)

 

 

N o t e

You may wisht to remove the metal cover (on the

 

lower right side) and the power supply for easier

 

access to the Formatter Cage screws.

1 Remove the Right Side Cover and the Top Cover.

2 LaserJet 4 and 5: Remove the (7) screws (6 screws in the LJ

5)shown in Figure 6-24a. (2) screws are on the right rear of the printer, (1) screw is under the lower front of the Formatter Cage (except LJ 5).

LaserJet 4 Plus: Remove the (3) screws shown in Figure

6-24b (one screw is located behind the SIMM door), and the (2) screws on the right rear of the printer (shown in Figure 6-24c).

3 Remove the Rear Door Support Strap.

4 Slide the Formatter Cage straight out the right side of the printer, being careful not to damage the Formatter/DC Controller pin connectors.

(continued on next page)

Removal and Replacement 6-27