Setting the Cold Reset Default

The default paper size outside of the U.S. is typically A4. Therefore, when replacing Formatters where the desired default is A4, the Customization Variable must be set to A4. This prevents the Cold Reset procedure from resetting the paper size to Letter. To set the Customization Variable:

1 Enter the Service Mode as described previously.

2 Press the [Menu] key to display SERVICE MENU.

3 Press the [Item] key to display CR PAPER=LETTER

4 Press the [+/-]key to toggle between Letter and A4 paper. 5 Press the [Enter] key to save your selection.

6 Press [On Line] to exit the Service Mode.

3-22 Configuration