Fuser Assembly Removal

Figure 6-20

Fuser Assembly Screws

 

The Fuser Assembly may be hot. Allow plenty of

C a u t i o n

 

time for the fuser to cool before beginning the

 

fuser removal procedure.

1 Open the rear door.

2 Remove the (2) screws that hold the Fuser to the printer frame (see Figure 6-20, callout 1).

3 Slightly lift the Fuser by both the right and left sides to clear the locator points.

4 Pull the Fuser from the printer.

N o t e

The Fuser Assembly from the LaserJet 4 cannot

 

be interchanged with the Fuser Assembly from

 

the LaserJet 4 Plus or 5 printers.

6-22 Removal and Replacement