DC Controller Removal

Figure 1-27a DC Controller Connectors/Retaining Clips

 

(LaserJet 4)

 

 

N o t e

Note the cable routing before beginning this

 

disassembly procedure. Be careful not to damage

 

the cables during re-assembly.

1 Remove the Right Side and the Top Cover Assemblies.

2 Remove the Formatter Cage Assembly.

3 Remove the 6-wire connector from the Power Supply.

4 Remove the plastic DC Controller cover (LaserJet 4 Plus). 5 Remove the DC Controller connectors (see Figure 6-27a or

6-27b, callout 1).

6 Release the DC Controller from its retaining clips (2) and remove the DC Controller (see Figure 6-27a or 6-27b, callout 2).

6-33 Removal and Replacement