Changing the Control Panel Display Language

The default control panel display language is set for English. Supported languages are: English, French, German, Italian, Spanish, Finnish, Danish, Dutch, Swedish, Norwegian, and Portuguese. Follow these instructions to change the display language.

1 Switch OFF the printer.

2 Press and hold [Enter] (or Select on the LJ 5) while switching the printer ON until CONFIG LANGUAGE appears in the display.

3 After the power-on self test, LANGUAGE=ENGLISH appears. Press

[+]until the desired language appears in the display.

4 Press [Enter] to save your choice. An asterisk (*)appears next to the language to indicate it is now the default.

5 Press [On Line]. The On Line indicator is lit, and display messages are now in the language you selected.

N o t e

If the display language is changed, replace or install the Control Panel Overlay to match the selected language. See the index to Chapter 6 for instructions on changing or installing the Control Panel Overlay.

N o t e

Failure to explicitly select a language after powering on the printer while holding down the ENTER or SELECT key will cause the printer to prompt for a specific language every time it is powered on.

3-28 Configuration