Removing the Fuser Roller Heat Lamp

Figure 1-41 Fuser End Cap Removal (LaserJet 4 only)

1 Laser Jet 4 only: Remove the (2) latches that hold the right side cover. (There is a gear exposed on the right side of the fuser, see Figure 6-41, callout 1.)

2 Release the (7) latches on the LaserJet 4 or the (5) latches on the LaserJet 4 Plus that hold the wire cover to the Fuser Assembly. These latches can be accessed through slots on top of the fuser.

(continued on next page)

6-49 Removal and Replacement