Rear Door Removal

Figure 6-6 Releasing the Door Support

1Remove the PC tray (Tray 2).

2Open the Rear Door. Support the door with one hand.

3Release the door support from the rear of the printer frame as follows: (see Figure 6-6)

a Using needle-nose pliers, squeeze the tabs on the end of the retaining strap. Slide the strap up and out of the printer frame.

b Release the retaining strap tab from the slot in the printer frame.

c Lift the tab to free it from the slot.

(continued on next page)

6-8 Removal and Replacement