5 Under the Extras menu, select Set Printer Password. On the Printer Security screen, enter the new password (numeric values can be set from 0 to 65535), and click on the OK button.
HP JetAdmin Utility (Novell Networks)
1 Run JETADMIN.
2 Select the printer you want to configure. It is listed under its “JetDirect Interface Name” which appears on the self test page/configuration plot.
3 Select Configuration.... The Printer I/O Configuration screen appears.
4Select Advance.... The Advance Settings screen appears.
5Select Lock Printer Control Panel....
6Click on Select... (the Advanced: Printer Security screen appears), then click on the ON button.
7Click the OK button.
ASCII PJL Escape Sequence
Password: send this sequence to the printer from any ASCII editor:
EC
@PJL DEFAULT PASSWORD=[numeric password (0 to 65535)]
@PJL EOJ EC
CPLOCK: to turn on or off, assuming that a password has NOT been set, send the following ASCII sequence to the printer:
EC
@PJL DEFAULT CPLOCK=ON [OFF]
@PJL EOJ
EC
If a password HAS been set, send the following ASCII sequence to the printer to turn CPLOCK on or off.:
EC
@PJL DEFAULT CPLOCK=ON(OFF)
@PJL EOJ
EC
Configuration