Setting the Cold Reset Default
A Cold Reset procedure returns most user-selectable Control Panel Menu selections to their factory defaults, including Paper Size and Tray 1 Size settings. All 220/240 printers are set from the factory to default to A4 paper size settings when the user performs either a Cold Reset or Factory Default Reset procedure. However, when a Formatter is replaced after leaving the factory (due to a need for service), a Cold Reset or Factory Default Reset will result in apaper size of Letter for the default paper size.
To reset the default Cold Reset (and Factory Default Reset) paper size value to A4:
1 Enter the Service Mode as described previously.
2 Press the [Menu] key to display SERVICE MENU.
3 Press the [Item] key to display CR PAPER=LETTER
4 Press the [Value+/-]key to toggle between Letter and A4 paper. 5 Press the [Select] key to save your selection.
6 Press [Go] to exit the Service Mode.
For more information regarding the Cold Reset procedure, refer to Chapter 3 of this manual.
LaserJet 5/5M/5N Printer B-27