HP C4390 Pages in my document came out in the wrong order, Margins are not printing as expected

If the connections are secure, and nothing has printed several minutes after you sent

aprint job to the HP All-in-One, check the status of the HP All-in-One. In the HP Photosmart Software, click Status.

For more information, see:

“Communication problems over a USB connection” on page 91

Cause: The HP All-in-One has a paper jam.

Solution: Clear the paper jam.

For more information, see:

“Clear paper jams” on page 94

Cause: The print carriage has stalled.

Solution: Turn the HP All-in-One off and open the print cartridge door. Remove any objects that are blocking the print carriage (including any packing materials), and then turn the HP All-in-One on again.

Cause: The HP All-in-One is out of paper.

Solution: Load paper in the input tray.

For more information, see:

“Load full-size paper” on page 35

The pages in my document came out in the wrong order

Cause: The print settings are set to print the first page of your document first. Because of the way the paper feeds through the HP All-in-One, this means the first page will be print side up at the bottom of the stack.

Solution: Print the document in reverse order. When the document finishes printing, the pages will be in correct order.

For more information, see:

“Print a multiple-page document in reverse order” on page 55

Troubleshooting

The margins are not printing as expected

Cause: The margins are not set correctly in your software application.

Solution: Check the printer margins.

Print troubleshooting 123