Chapter 5

Related topics

Print the wireless network test” on page 23

Wireless setup troubleshooting” on page 108

Change the HP All-in-One from a USB connection to a network connection

If you first install the HP All-in-One with a USB connection, you can later change to a wireless network connection. If you already understand how to connect to a network, you can use the general directions below.

Finish setup

To change a USB connection to an integrated wireless WLAN 802.11 connection

1.Unplug the USB connection from the back of the HP All-in-One.

2.Insert the HP All-in-One CD in the computer CD-ROM drive.

3.Follow the onscreen instructions for a wireless network installation.

4.When the installation is complete, open Printers and Faxes (or Printers) in the Control Panel and delete the printers for the USB installation.

For more detailed instructions on connecting the HP All-in-One to a network, see:

Integrated wireless WLAN 802.11 network setup” on page 17

Wireless ad hoc network setup” on page 18

Manage your network settings

You can manage network settings for the HP All-in-One through the HP All-in-One control panel.

This section contains the following topics:

Change basic network settings from the control panel

Network configuration page definitions

Change basic network settings from the control panel

The HP All-in-One control panel enables you to perform a variety of network management tasks. This includes printing the network settings, restoring the network defaults, turning the wireless radio on and off, and printing a wireless network test.

This section contains the following topics:

Print network settings

Restore network defaults

Turn the wireless radio on and off

Print the wireless network test

Print network settings

You can print a network configuration page to see network settings such as the IP address, communication mode, and network name (SSID).

22 Finish setting up the HP All-in-One

Page 23
Image 23
HP C4385, C4380 Manage your network settings, Change basic network settings from the control panel, Print network settings