HP HyperFabric manual Clicprobe bently7 -c clic0 -p

Managing HyperFabric

Verifying Communications within the Fabric

CLIC_PROBE: 256 byte packets

Source adapter id: bently6.corp3.com:clic0

Target adapter id: bently4.corp7.com:clic3

256	bytes:	seq_num	= 1.	Packet Acknowledged.
256	bytes:	seq_num	= 2.	Packet Acknowledged.
256	bytes:	seq_num	= 3.	Packet Acknowledged.
256	bytes:	seq_num	= 4.	Packet Acknowledged.
256	bytes:	seq_num	= 5.	Packet Acknowledged.
256	bytes:	seq_num	= 6.	Packet Acknowledged.
256	bytes:	seq_num	= 7.	Packet Acknowledged.
256	bytes:	seq_num	= 8.	Packet Acknowledged.
---------		bently6.corp3.com CLIC_PROBE Statistics --------
8 packets transmitted,			8 packets received, 0% packet loss.

•Example 3

If the local node is bently6, and you want to send five packets to verify communications with the remote node bently7, using the adapter clic0 (which is on bently6), issue this command:

clic_probe bently7 -c clic0 -p 5

CLIC_PROBE: 256 byte packets

Source adapter id: bently6.corp3.com:clic0

Target adapter id: bently7.corp4.com:clic1

256 bytes: seq_num = 1. Packet Acknowledged.

256 bytes: seq_num = 2. Packet Acknowledged.

256 bytes: seq_num = 3. Packet Acknowledged.

256 bytes: seq_num = 4. Packet Acknowledged.

256 bytes: seq_num = 5. Packet Acknowledged.

--------- bently7.corp4.com CLIC_PROBE Statistics --------

5 packets transmitted, 5 packets received, 0% packet loss.

•Example 4

If the local node is bently6, and you want to send five packets to verify communications with the remote node bently7, using the adapter clic0 (which is on bently6) and the route identified by VRID 194 and switch hopcount 1, issue this command:

clic_probe -c clic0 -r 194 1 -p 5

(Remember, because you specified the -rVRID switch_hopcount parameter, you do not need to also specify the node_name.)

Chapter 5 115