Managing HyperFabric
Displaying Status and Statistics
Firmware reset notification: | 0 |
Data corruption notification: | 0 |
Unsupported QOS message received: | 0 |
Invalid HMP VC ID: | 0 |
Invalid HMP endpoint ID: | 0 |
Invalid HMP endpoint protection key: | 0 |
HMP message order violation: | 0 |
Packet drops: | 0 |
Transmit side congestion events: | 1 |
Receive side congestion events: | 0 |
Other Misc Statistics |
|
Mapping message send failures: | 0 |
============================================================================
b.HMP in the local failover mode
If the local node is bently7, and you want to display the statistics for the adapter clic1 (which is on bently7), issue this command:
clic_stat -c clic1
The generated output could look like this:
============================================================================
Date: Sat Aug 5 16:08:30 2000
Node: bently7.corp2.com |
|
Adapter ID: | clic1 |
Card Pair: | clic0 |
Instance Number: | 1 |
Adapter Type: | 4X HF2 PCI |
Firmware File: | /opt/clic/firmware/clic_fw_hf232c |
Major Num: | 238 |
Mgmt process driver handle: | 5 |
Version: | 1.0 |
H/W Path: | 8/4/0/0 |
Primary IP address: | 192.0.0.9 |
Uptime time: | 0 days 21 hours 1 min 3 sec |
Adapter State Flags Set - Multiple flags may be set:
Configured and operational
Switch mode
F/W Error Statistics
122 | Chapter 5 |
