Troubleshooting HyperFabric
Useful Files
/var/adm/clic_fw.dumpx
This is the default file for a memory dump of an HyperFabric adapter, created when the clic_diag -dcommand is run without specifying an output file.
•/etc/rc.config.d/netconf
This file contains IP-related configuration information for all of the networking adapters installed in the HP 9000.
IMPORTANT: clic_init and SAM modify this file, adding some HyperFabric-related lines that end with the characters #clic. These lines are used by the HyperFabric software—and are not comments—so do not remove them from the file.
•/etc/services
This is the system service name database.
IMPORTANT: These two HyperFabric-related lines must be in this file:
—hp-clic 3384/tcp #clic management daemon
—hp-clic 3384/udp #clic switch management
These lines are used by the HyperFabric software—and are not comments—so do not remove them from the file.
