Managing HyperFabric
Displaying Status and Statistics
Frame buffer overflow: | 0 |
Receive on disabled endpoint: | 0 |
Invalid endpoint ID: | 0 |
Invalid endpoint protection key: | 0 |
Interleaved gathered receive: | 0 |
Interleaved
NQ overflow: | 0 |
Send NQ overflow: | 0 |
Invalid slot key for NQ credit update: | 0 |
DLPI QOS receive buffer shortage: | 0 |
Link congestion events: | 0 |
Max send packet retry exceeded: | 0 |
Link or switch failure events: | 0 |
Link or switch resume events: | 1 |
Bad route detected: | 0 |
Bad optional data length: | 0 |
Invalid message received: | 0 |
CRC error: | 0 |
Invalid CRC word: | 0 |
Bad frame length: | 0 |
Receive buffer overflow: | 0 |
Null packets generated on link reset: | 2 |
Firmware reset notification: | 0 |
Data corruption notification: | 0 |
Unsupported QOS message received: | 0 |
Invalid HMP VC ID: | 0 |
Invalid HMP endpoint ID: | 0 |
Invalid HMP endpoint protection key: | 0 |
HMP message order violation: | 0 |
Packet drops: | 0 |
Transmit side congestion events: | 1 |
Receive side congestion events: | 0 |
Other Misc Statistics |
|
Mapping message send failures: | 0 |
============================================================================
•Example 4
If the local node is bently6, and you want to display the VRIDs, IP addresses, switch hopcounts, and physical routes for each HyperFabric adapter in bently6, issue this command:
clic_stat -d VRID
The generated output if the nodes are connected in a
Chapter 5 | 123 |
