HP HyperFabric manual 116

Managing HyperFabric

Verifying Communications within the Fabric

The generated output could look like this:

CLIC_PROBE: 256 byte packets sent

Source adapter id: bently6.corp3.com:clic0

Target adapter id: bently7.corp4.com:clic1

256	bytes:	seq_num	= 1.	Packet Acknowledged.
256	bytes:	seq_num	= 2.	Packet Acknowledged.
256	bytes:	seq_num	= 3.	Packet Acknowledged.
256	bytes:	seq_num	= 4.	Packet Acknowledged.
256	bytes:	seq_num	= 5.	Packet Acknowledged.
---------		bently7.corp4.com CLIC_PROBE Statistics --------
5 packets transmitted,			5 packets received, 0% packet loss.

Note that the VRID you specified (194) actually went to the adapter clic1 on bently7. And, as explained earlier, you run the clic_stat -d VRID command to determine the VRID and switch hopcount to specify.

116 Chapter 5