HP HyperFabric manual Examples of clicstat, Clicstat -p TCP

Managing HyperFabric

Displaying Status and Statistics

•-cdisplays the statistics of the adapter identified by adapter_ID.

•-ndisplays statistics for the node identified by nodename.

•-sspecifies that you want to get the status of the switch identified by switch_ID (assigned by clic_init or SAM). Note that this parameter is meaningful only if you enabled switch management (through the clic_init command).

To determine the switch_ID, run the clic_stat command without specifying any parameters. This displays each switch_ID known to the system. Look through the command’s output to find the ID of the switch you are interested in.

•-?displays the online help for clic_stat.

If you do not specify any of the above parameters, the current fabric map is displayed, showing the last known status of the components.

Examples of clic_stat

Some examples of using clic_stat are as follows:

•Example 1

If the local node is bently7, and you want to enable DLPI driver statistics gathering, issue this command:

clic_stat -p TCP

The generated output could look like this:

============================================================================

Date: Sat Aug 5 16:08:14 2000

Node: bently7.corp2.com

----------------------------------------------------------------------------

Performance Statistics Levels - Possible perf degradation occurring: DLPI performance statistics enabled

============================================================================

•Example 2

Chapter 5 119