Planning the Fabric
Hyper Messaging Protocol (HMP)
HP MPI is a native implementation of version 1.2 of the
Features
The following are the HyperFabric features on HMP:
•OnLine Addition and Replacement (OLAR)
The OLAR feature, which allows the replacement or addition of HyperFabric adapter cards while the system (node) is running, is supported when applications use HMP to communicate.
•Event Monitoring Service (EMS): Supported
In the HyperFabric version B.11.23.01, the HyperFabric EMS monitor enables the system administrator to separately monitor each HyperFabric adapter on every node in the fabric, in addition to monitoring the entire HyperFabric subsystem. The monitor can inform the user if the resource being monitored is UP or DOWN. The administrator defines the condition to trigger a notification (usually a change in interface status). Notification can be accomplished with a SNMP trap, or by logging into a user specified log file with a choice of severity, or by email to a user defined email address.
For more information on EMS, including instructions for implementing this feature, see “Configuring the HyperFabric EMS Monitor” on page 85 in this manual, and the EMS Hardware Monitors User’s Guide Part Number
•ServiceGuard: Supported
Within a cluster, ServiceGuard groups application services (individual
Chapter 2 | 27 |