NOTE: In environments where more than one model of the same printer is installed, it might be helpful to provide each printer a unique
Change the printer
Follow this procedure to change the printer
Step one: Open the HP Embedded Web Server
1.From the Home screen on the printer control panel, select the Connection Information
button, and then touch the Network Connected or the Network
2.Open a Web browser, and in the address line, type the IP address or host name exactly as it displays on the printer control panel. Press the Enter key on the computer keyboard. The EWS opens.
If the Web browser displays a There is a problem with this website’s security certificate message when attempting to open the EWS, click Continue to this website (not recommended).
NOTE: Choosing Continue to this website (not recommended) will not harm the computer while navigating within the EWS for the HP printer.
Step two: Change the
1.Click the Networking tab.
2.On the left navigation pane, click the
3.In the
4.Click Apply.
HP ePrint via email
Use HP ePrint to print documents by sending them as an email attachment to the printer's email address from any
NOTE: The printer might require a firmware update to use this feature.
To use HP ePrint, the printer must meet these requirements:
●The printer must be connected to a wired or wireless network and have Internet access.
●HP Web Services must be enabled on the printer, and the printer must be registered with HP Connected. Follow this procedure to enable HP Web Services and register with HP Connected:
1.From the Home screen on the printer control panel, touch the Connection Information button.
2.Open the following menus:
ENWW | Mobile printing 49 |