Table 10-1Numeric Codes and Text Messages (continued)

Control panel message

Description

Recommended action

 

 

 

 

2203-Setup error during MEBx execution

MEBx selection or exit resulted in a setup

1.

Reboot the computer.

 

failure.

2.

Unplug the power cord, re-seat the

 

 

 

 

 

memory modules, and reboot the

 

 

 

computer.

 

 

3.

If the memory configuration was

 

 

 

recently changed, unplug the power

 

 

 

cord, restore the original memory

 

 

 

configuration, and reboot the computer.

 

 

4.

If the error persists, replace the system

 

 

 

board.

 

 

 

 

2204-Inventory error during MEBx execution

BIOS information passed to the MEBx

1.

Reboot the computer.

 

resulted in a failure.

2.

If the error persists, update to the latest

 

 

 

 

 

BIOS version.

 

 

3.

If the error still persists, replace the

 

 

 

system board.

 

 

 

 

2205-Interface error during MEBx execution

MEBx operation experienced a hardware

1.

Reboot the computer.

 

error during communication with ME.

2.

If the error persists, update to the latest

 

 

 

 

 

BIOS version.

 

 

3.

If the error still persists, replace the

 

 

 

system board.

 

 

 

2211-Memory not configured correctly for

DIMM1 or XMM1 is not installed.

Make sure there is a memory module in the

proper MEBx execution.

 

black DIMM1 socket and that it is properly

 

 

seated.

 

 

 

 

2212-USB Key Provisioning failure writing to

USB device used for USB key provisioning

1.

Try a different USB key device for

device

will not allow BIOS to update provision file

 

provisioning.

 

properly.

2.

If the error persists, update to the latest

 

 

 

 

 

BIOS version and ME firmware version.

 

 

3.

If the error still persists, replace the

 

 

 

system board.

 

 

 

 

2217-ME Firmware Version request failure

ME firmware is not properly responding to

1.

Reboot the computer.

 

BIOS query for version information.

2.

If the error persists, update to the latest

 

 

 

 

 

BIOS version and ME firmware version.

 

 

3.

If the error still persists, replace the

 

 

 

system board.

 

 

 

 

2218-ME Firmware Version should be

ME firmware must be updated to match

1.

Update to the latest ME firmware

updated

current functionality contained in the system

 

version.

 

BIOS.

2.

If the error persists and system BIOS

 

 

 

 

 

has been recently updated, restore

 

 

 

previous system BIOS version.

 

 

3.

If the error still persists, replace the

 

 

 

system board.

 

 

 

 

POST Numeric Codes and Text Messages 193