HP Pro 6305 manual 2Drive Positions, Guide Screw Device

No.	Guide Screw	Device
1	Black M3 Metric Screws	All Drives (except hard drives)
2	Silver and Blue 6-32 Isolation Mounting Screws	Secondary Hard Drive

CAUTION: To prevent loss of work and damage to the computer or drive:

If you are inserting or removing a drive, shut down the operating system properly, turn off the computer, and unplug the power cord. Do not remove a drive while the computer is on or in standby mode.

Before handling a drive, ensure that you are discharged of static electricity. While handling a drive, avoid touching the connector.

Handle a drive carefully; do not drop it.

Do not use excessive force when inserting a drive.

Avoid exposing a hard drive to liquids, temperature extremes, or products that have magnetic fields such as monitors or speakers.

If a drive must be mailed, place the drive in a bubble-pack mailer or other protective packaging and label the package “Fragile: Handle With Care.”

Drive Positions

Figure 6-14Drive Positions

Table 6-2Drive Positions

1Two 5.25-inch drive bays for optional drives (optical drives shown)

2One 3.5-inch drive bay for optional drive (media card reader shown)

72 Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis