Figure 2. Operator Panel
From left to right in Figure 2, the push buttons and the indicator are as follows:
Reset
A push button that allows the service representative to perform a device
Note: It is recommended that all SCSI ports be taken offline before resetting the drive. See “Services Menu” on page 33.
Change Mode
A push button that allows the service representative to toggle between service representative mode and Normal mode. Service representative mode can be selected at any time, but the mode will not become active until the device completes all current operations. Normal mode can be selected at any time. Selecting Normal mode returns the operator panel menu to the Operator menu (that indicates status and conditions). Service representative mode enables special menus on the operator panel display not available to the operator in Normal mode.
Up Arrow
A push button that allows the operator or the service representative to move the cursor arrow up through the menu options.
Down Arrow
A push button that allows the operator or the service representative to move the cursor arrow down through the menu options.
Chapter 3. Drive Operator Panel and Controls 7
