Confirm Offline Menu
Table 11 shows the Confirm Offline menu.
Table 11. Confirm Offline
Function | Next Menu |
|
|
Cancel | “Set Offline Menu” on page 36 |
|
|
Proceed | “Options Menu” on page 31 |
|
|
Note: Supplemental Message Line 1: Caution: Data loss Supplemental Message Line
2:risk
Cancel
Cancels the offline request and causes the “Set Offline Menu” on page 36 to appear.
Proceed
Forces the ports offline. If write activity exists, any write data in the device is lost. The Proceed option causes the job to end.
Attention: The device should be quiesced by the host (vary the device offline) before taking the device offline or before powering off the device.
Note: Current operation (for example Locate) will be completed before Proceed executes. This may cause a delay before Proceed is executed.
Set Address Menu
Table 12 shows the Set Address menu.
Table 12. Set Address
Function | Next Menu |
|
|
Cancel | “Services Menu” on page 33 |
|
|
Port 0... | “Set Port 0 Address Menu” on page 38 |
|
|
Port 1... | “Set Port 1 Address Menu” on page 39 |
|
|
Note: Supplemental Message Line 1: Change made after Supplemental Message Line
2:unload and reset
Cancel
Causes the “Services Menu” on page 33 to appear.
Port 0 Causes the “Set Port 0 Address Menu” on page 38 to appear. Port 1 Causes the “Set Port 1 Address Menu” on page 39 to appear.
Note: The address must be defined at the host also.
Chapter 3. Drive Operator Panel and Controls 37
