Table5. Operator Messages (continued)
Message Operator Response
TENSION DROPPED
Operator intervention or possible service representativecorrective
action required.
Select Unload on the operator panel and press Enter.If the device fails
to unload the cartridge, note any FID messages and call your service
representative.
TRANSPORTFULL
1. Operator intervention required.
2. The drive attempted to unload a cartridge, but had no place to put
it. The magazine handle was moved while the drive was unloading
a cartridge, or,a tape was present in the slot where ACF transport
tried to unload, so tape cartridge is still left in transport. Action:
Do not remove the magazine while the status areaon the operator
panel is displaying Transferring.
3. Unload priority slot.
4. Service representativeintervention may be required.
UNLOAD ERROR
Operator intervention or possible service representativecorrective
action required.
Select Unload on the operator panel and press Enter.If the device fails
to unload the cartridge, note any FID messages and call your service
representative.
1. Ensure that the cartridge is not brokenand the leader block is
intact. See “Damaged Cartridges”on page87 and “Leader Block
Replacement”on page 90.
2. Ensure that the cartridge is a 3590 compatible-type cartridge.Also,
check the location of the tape and the leader block.
UNLOCK MAGAZINE
Operator action required:
Remove and replace the magazine. Tryanother magazine. If the
condition persists or a FID message is displayed, report any FID codes
to your service representative.
WRONG MODE
Operator action required:
ACF mode incorrect for the command. For moreinformation, see
“Modes of Operation”on page 55.
Operator Panel MenusThe operator panel allows information to be passed from the device to the
operator and back to the device. The operator and service representative can
be presented menu-driven options for device operation. Examples include the
display of SCSI port addresses and operator panel languages.
Options that are unavailable are displayed in a lighter dotted font, and cannot
be selected. The example in Figure8 on page 29 shows the Unload Drive
28 3590 Operator Guide