labels on the power supply to mark the LEDs correctly. The label sheet contains the
5.Using the information on the instruction sheet, place the labels on the power supply to correctly mark the LEDs.
6.Turn off the power switch on the new unit.
7.Check the fault LED to locate the failed power supply. If a fault is detected, the amber fault LED is lit.
8.Make sure that the service action allowed LED is lit. Do not remove the power supply if the LED is off. For more information about the service action allowed LED, see “Service action allowed LED” on page 63.
84System Storage DS3200 Storage Subsystem: Installation, User’s, and Maintenance Guide
