IBM DS3200 Storage Subsystem manual Cabling the DS3200 power supplies

Figure 32 shows an example of a DS3200 that is connected to one BladeCenter unit.

Figure 32. Example of a DS3200 that is connected to one BladeCenter unit

Cabling the DS3200 power supplies

To connect the DS3200 power-supply cords, complete the following steps:

1.Connect a power cord to a power supply in the DS3200.

2.Attach the power cord to the strain relief guide that is on the underside of the power-supply handle.

3.Repeat steps 1 and 2 for the second power supply.

4.Connect the other end of each power cord to a correctly grounded electrical receptacle. For maximum protection against power loss, connect each of the two power supplies to a different power source.

Chapter 3. Cabling the storage subsystem 43