One single-controller DS3200 and one or more storage expansion enclosures
To cable one single-controller DS3200 to one or more single-ESM storage expansion enclosures, connect them as shown in Figure 19.
| | SAS cable | |
EXP3000 | | | | | | To DS3200 RAID | |
| | | | | controller A | |
| | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
SAS cable
EXP3000
SAS cable
EXP3000
Figure 19. One single-controller DS3200 and multiple single-ESM storage expansion enclosures
Note: In storage expansion enclosures that are connected to a dual-controller storage subsystem, you must install the optional second ESM to support dual redundant drive paths, and must use one of the dual-controller topologies that are described in this section.
Chapter 3. Cabling the storage subsystem 29
