Intel GD82559ER Flash/EEPROM Interface DC Specifications, LED Voltage/Current Characteristics

GD82559ER — Networking Silicon

Table 16. PCI Interface DC Specifications

		Iout = -2 mA	2.4		V	PCI
VOHP	Output High Voltage	Iout = -500 μA	0.9VCC		V
		Iout = 3 mA, 6 mA		0.55	V	3, PCI
VOLP	Output Low Voltage	Iout = 1500 μA		0.1VCC	V
CINP	Input Pin Capacitance			10	pF	4
CCLKP	CLK Pin Capacitance		5	12	pF	4
CIDSEL	IDSEL Pin Capacitance			8	pF	4
LPINP	Pin Inductance			12	nH	4

NOTES:

1.These values are only applicable in 3.3 V signaling environments. Outside of this limit the input buffer must consume its minimum current.

2.Input leakage currents include high-Z output leakage for all bidirectional buffers with tri-state outputs.

3.Signals without pull-up resistors have 3 mA low output current; and signals requiring pull-up resistors, 6 mA. The signals requiring pull-up resistors include: FRAME#, TRDY#, IRDY#, DEVSEL#, STOP#, SERR# and PERR#.

4.This value is characterized but not tested.

Table 17. Flash/EEPROM Interface DC Specifications

Symbol	Parameter	Condition	Min	Max	Units	Notes
VIHL	Input High Voltage		2.0	VCC + 0.5	V
VILL	Input Low Voltage		-0.5	0.8	V
IILL	Input Low Leakage	0 < Vin < VCC		±20	μA
	Current
VOHL	Output High Voltage	Iout = -1 mA	2.4		V
VOLL	Output Low Voltage	Iout = 2mA		0.4	V
CINL	Input Pin Capacitance			10	pF	1

1. This value is characterized but not tested.

Table 18. LED Voltage/Current Characteristics

Symbol	Parameter	Condition	Min	Typical	Max	Units	Notes
VOHLED	Output High Voltage	Iout = -10 mA	2.4			V
VOLLED	Output Low Voltage	Iout = 10 mA			0.7	V

Table 19. 100BASE-TX Voltage/Current Characteristics

Symbol	Parameter	Condition	Min	Typical	Max	Units	Notes
RID100	Input Differential	DC	10			KΩ
	Impedance
VIDA100	Input Differential		±500		0.7	mV
	Accept Peak Voltage

74 Datasheet