Intel SE7520JR2 4.4.2Entering BIOS Setup, bold, C78844-002, System BIOS, 4.4.2.1Main Menu, Intel® Server Board SE7520JR2, Table 19: BIOS Setup, Main Menu Options

Intel® Server Board SE7520JR2			System BIOS
Key	Option	Description
↔	Select Menu	The left and right arrow keys are used to move between the major menu pages. The
		keys have no affect if a sub-menu or pick list is displayed.
Tab	Select Field	The Tab key is used to move between fields. For example, Tab can be used to move
		from hours to minutes in the time item in the main menu.
-	Change Value	The minus key on the keypad is used to change the value of the current item to the
		previous value. This key scrolls through the values in the associated pick list without
		displaying the full list.
+	Change Value	The plus key on the keypad is used to change the value of the current menu item to the
		next value. This key scrolls through the values in the associated pick list without
		displaying the full list. On 106-key Japanese keyboards, the plus key has a different
		scan code than the plus key on the other keyboard, but will have the same effect.
F9	Setup Defaults	Pressing F9 causes the following to appear:
		Load Setup Defaults?
		[OK]	[Cancel]
		If “OK” is selected and the Enter key is pressed, all setup fields are set to their default
		values. If “Cancel” is selected and the Enter key is pressed, or if the ESC key is
		pressed, the user is returned to where they were before F9 was pressed without
		affecting any existing field values.
F7	Discard Changes	Pressing F7 causes the following message to appear:
		Discard Changes?
		[OK]	[Cancel]
		If “OK” is selected and the Enter key is pressed, all changes are not saved and setup is
		exited. If “Cancel” is selected and the Enter key is pressed, or the ESC key is pressed,
		the user is returned to where they were before F7 was pressed without affecting any
		existing values.
F10	Save Changes and	Pressing F10 causes the following message to appear:
	Exit	Save configuration changes and exit setup?
		[OK]	[Cancel]
		If “OK” is selected and the Enter key is pressed, all changes are saved and setup is
		exited. If “Cancel” is selected and the Enter key is pressed, or the ESC key is pressed,
		the user is returned to where they were before F10 was pressed without affecting any
		existing values.

4.4.2Entering BIOS Setup

The BIOS Setup utility is accessed by pressing the <F2> hotkey during POST

4.4.2.1Main Menu

The first screen displayed when entering the BIOS Setup Utility is the Main Menu selection screen. This screen displays the major menu selections available. The following tables describe the available options on the top level and lower level menus. Default values are shown in bold text.

Table 19: BIOS Setup, Main Menu Options

Feature Options Help Text Description

Revision 1.0	85
	C78844-002