Lincoln Electric SVM153-A service manual Figure F.13 Front Control Panel Removal Screws

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Master TOC

Return to Master TOC

Return to Master TOC

F-35	F-35
	TROUBLESHOOTING & REPAIR

STATOR VOLTAGE TEST (CONTINUED)

FIGURE F.13 – FRONT CONTROL PANEL REMOVAL

SCREWS

FRONT

CONTROL

PANEL

SCREW

TEST PROCEDURE

Return to Section TOC

Return to Master TOC

1.Turn the engine off.

2.Using the 3/8" wrench, remove the four screws holding the front control panel to the case top and sides. See Figure F.13. (There are two screws on the top and one screw on each side.)

3.Carefully lower the front control panel.

4.Using the 3/8" wrench, remove the front left and right side panels.

5.Using the 3/4" wrench, remove the internal leads from the output terminals. Insulate the leads.

COMMANDER 500