Reception Features

Priority Table

5

Page reduction

Disabled

 

 

Reduction in Sub-

Enabled

scan Direction

 

 

 

Page Separation

20 mm (0.79")

Threshold

 

 

 

Width or Length Pri-

Width

ority

 

 

 

KK and LL indicate that the message is split over two pages of paper with the orientation and size shown.

Note

Paper placed in the bypass tray is not usually selected for printing a received message. However, you can use this tray if you select the bypass tray as the main paper tray using Reception with Specified Senders. See p.152 “Special Send- ers to Treat Differently”.

Widths that this machine can re- ceive are A4, B4 JIS, and A3. Any messages narrower than A4 are sent as A4 width with the length unchanged.

The paper size used to print a re- ceived message may be different from the size of the sent original.

If you specify a receiving tray with the setting priority under System Settings, the messages may be re- ceived in a different order by set- ting the priority table. The priority tray may be used only when the document received is the same size as the priority tray.

Reference

p.88 “Page Separation and Length Reduction”

p.89 “Page Reduction”

p.87 “Image Rotation”

Just Size Printing

If you turn this function on and no pa- per tray is stocked with paper of a suitable size to print a received docu- ment, a message will appear on the display prompting you to load paper of the required size. When you have loaded new paper, you can then print the message.

Two messages can appear:

Paper Cassette

90

Page 102
Image 102
Microsoft 2045 appendix Priority Table, Just Size Printing