Advanced Features

C Press [Adv. Features].

D Select [Transfer Req.].

E Press [Receiving Station].

F Dial an End Receiver.

Note

You cannot enter End Receiver numbers directly. The numbers must be stored in Destination lists, Speed Dial, or Groups in the Transfer Station(s). To spec- ify an End Receiver, use the pro- cedure described below.

To cancel the Transfer Request, press [Cancel]. The display re- turns to that of step E.

Destination List

APress [q Quick Dial].

BEnter the number of the Desti- nation list where the End Re- ceiver is stored.

For example, to select the number stored in Quick Dial 01 of the Transfer Station, enter:

{0} {1}.

Speed Dial

APress [qpSpeed Dial].

BEnter the number of the Speed Dial code.

For example, to select the number stored in Speed Dial 12 of the Transfer Station, enter:

{1} {2}.

Group Dial

A Press [qppGroup Dial].

4

B Enter the number of the Group

number.

For example, to select the number stored in Group Dial 04 of the Transfer Station, enter: {0} {4}.

G To specify another End Receiver, press [Add].

Note

Press [U Prev.] or [T Next] to see the End Receivers already en- tered. You can select an End Re- ceiver from this list and remove it by pressing [Clear] or the

{Clear/Stop} key.

H When you have specified all the End Receivers, press [OK].

I Press [Exit].

The Transfer Stations and End Re- ceivers are displayed.

J Press the {Start} key.

49

Page 61
Image 61
Microsoft 2045 appendix Destination List, Speed Dial, Group Dial