Microsoft 2045 appendix Printed Report, Memory Storage Report, Communication Failure Report

Printed Report

Printed Report

Memory Storage Report

This report is printed after an original is stored in memory. It helps you re- view the contents and the destina- tions of stored originals. Even if the machine is set up not to print this re- port, it is still printed if an original could not be stored.

Note

❒You can turn this report on and off. See p.147 “Changing the User Pa- rameters” (switch 03, bit 2).

❒You can select whether to include part of the original image on the re- port. See p.147 “Changing the User Parameters” (switch 04, bit 7).

❒If you use Parallel Memory Trans- mission, the Memory Storage Re- port is not printed.

Transmission Result Report (Memory Transmission)

This report is printed when a Memo- ry Transmission is completed, so you can check the result of the transmis- sion. If two or more destinations are specified, this report is printed after the fax message has been sent to all the destinations. If the machine is set up not to print this report and the fax message could not be successfully transmitted, a Communication Fail- ure Report is printed. See p.75 “Com- munication Failure Report”.

Note

❒You can turn this function on or off with the User Parameters. See p.147 “Changing the User Parame- ters” (switch 03, bit 0).

❒You can select whether to include part of the original image on the re- port. See p.147 “Changing the User Parameters” (switch 04, bit 7).

❒The Page column gives the total

number of pages. The Not Sent col- 4

umn gives the number of pages that could not be sent successfully.

Communication Failure Report

This report is only printed if the Transmission Result Report is turned off and a message could not be suc- cessfully transmitted with Memory Transmission. Use it to keep a record of failed transmissions so you can send them again.

Note

❒You can select whether to include part of the original image on the re- port. See p.147 “Changing the User Parameters” (switch 04, bit 7).

❒The Page column gives the total number of pages. The Not Sent col- umn gives the number of pages that could not be sent successfully.

75