Microsoft 2045 appendix Press Sub TX Mode

Sub Transmission Mode

❒If you use this function often, you can set the default in “General Set- tings/Adjustment” so that this function is always on. In this case, Stamp can easily be turned off for any single transmission by press- ing [Stamp]. See p.130 “General Set- tings/Adjustment”. A paper jam during Parallel Memory Transmis- sion may cause the transmission to be failed even if stamping is per- formed.

❒You cannot turn the Stamp func- tion on or off while a document is being scanned.

A Place the original, and then select the scan settings you require.

Reference

p.11 “Placing Originals”, Fac- simile Reference <Basic Features>

p.27 “Scan Settings”, Facsimile

Reference <Basic Features>

B Press [Sub TX Mode].

C Select [Stamp], and then press [OK].

Note

❒To cancel the stamp, press [Stamp] again before pressing

[OK].

D Dial, and then press the {Start} key.

Transmission Options

This section describes various func- tions that you can switch on and off for any particular transmission, fol- lowing the procedures given here.

In addition, if you frequently use a certain option configuration, you can change the default home position (on or off) of each option.

Fax Header Print

In some cases, you may want the oth- 4

er party to receive an unmarked copy of your original. To do this, switch Fax Header off.

When the Fax Header is set to “ON”, the stored name is printed on the re- ceiver's paper.

You can store two Fax Headers; “First Name” and “Second Name”.

For example, if you store your depart- ment name in one and your organiza- tion name in the other, you could use the first when sending internal faxes and the second for external faxes.

Note

❒If you used the number keys to specify the receiver, the first head- er name will be printed on the re- ceiver's paper.

❒You can program fax header names using the Program Fax In- formation function.

❒You can select whether or not dates, fax header names, file num- bers, or page numbers are printed by changing their respective user parameters.

❒You can program one of the Quick Operation keys with operations for this function.

67