Microsoft 2045 PWD Code, Select SEP Code Press RX SEP Code, Enter a SEP code, and then press OK

Advanced Features

C Select [SEP Code].

D Press [RX SEP Code].

E Enter a SEP code, and then press [OK].

“SEP Code” appears one line above [Adv. Features] on the dis- play.

Note

❒If you make a mistake, press

[Cancel] or the {Clear/Stop} key before pressing [OK], and then try again.

To cancel entering a SEP code, press [Cancel]. The display returns to that of step D.

F To enter a password, press [Pass- word (PWD)].

G Enter the password using the number keys, and then press [OK].

H Press [Exit].

I Press [Transmission Mode].

J Select [Polling RX].

K Press [Default ID/Free Polling RX],

and then press [OK].

[Polling RX] is highlighted, and “Default ID/Free Poll.” is shown.

Note 4

❒To cancel Polling RX, press [Can- cel]. The display returns to that of step J.

L Press [OK].

The standby display appears.

M Press the {Start} key.

PWD Code

There are times you may want to use a password when receiving faxes by polling using the SEP Code function.

Note

❒The password can be up to 20 dig- its long.

❒You can enter numbers, *, #, and spaces as a password.

❒You can store IDs in Destination lists and Programs. See "Register- ing a Fax Destination", General Set- tings Guide. See p.113 “Registering and Changing Keystroke Pro- grams”.

❒Messages you send using this function are marked “PWD” on all reports.

47