Transmission Mode

D Depending on the Confidential Transmission type, use one of the following procedures:

1

Default ID

A Check that [Default ID] has been selected, and then press [OK].

"Default ID" is shown above the highlighted [Confidential TX].

Note

To cancel Contidential Transmission, press [Cancel]. The display returns to that of step C.

Note

If you make a mistake, press

[Clear] or the {Clear/Stop} key before pressing [OK], and then try again.

To cancel Confidential Transmission, press [Cancel]. The display returns to that of step C.

E Press [OK].

Note

To check the settings, press

[Transmission Mode].

F Dial, and then press the {Start} key.

Note

You can cancel the transmission setup for Confidential Trans- mission. See p.16 “Canceling a Transmission”.

Override ID

APress [ID Override].

BEnter the Confidential ID (4-dig- it number) using the number keys, and then press [OK].

"ID Override" and the entered Confidential ID are shown above the highlighted [Confiden- tial TX].

8

Page 20
Image 20
Microsoft 2045 appendix Override ID, Check that Default ID has been selected, and then press OK, Press ID Override