Microsoft 2045 appendix SEP Code, SID Code, Press Exit Press the Start key, Press Adv. Features

Other Transmission Features

I Press [Exit].

J Press the {Start} key.

Note

❒If you use Immediate Transmis- sion and the fax machine at the destination does not support the SUB Code function, a mes- sage will appear on the display to inform you of this. When this happens, press [OK] to cancel the transmission.

4 SID Code

There are times when you may want to use an “SID” (Sender ID) when sending confidential faxes with the SUB Code function.

Note

❒The ID can be up to 20 digits long.

❒You can enter numbers, *, #, and spaces to program an ID.

❒You can store IDs in Destination lists and Programs. See p.113 “Registering and Changing Key- stroke Programs”. See “Register- ing a Fax Destination”, General Settings Guide.

❒Messages you send using this function are marked “SID” on all reports.

SEP Code

Normally you can only use Polling Reception to receive faxes from ma- chines that have the Polling Recep- tion function and the sam e manufacturer. However, if a machine of another manufacturer supports Polling Reception, you can receive fax messages from the other party using this method instead.

You can receive messages that have the same SEP code as the SEP code you entered.

Note

❒The ID can be up to 20 digits long.

❒Make sure the number of digits in the ID matches the one set on the machine to which you are sending.

❒You can enter numbers, *, #, and spaces to program an ID.

❒You can store IDs in Destination lists and Programs. See "Register- ing a Fax Destination", General Set- tings Guide. See p.113 “Registering and Changing Keystroke Pro- grams”.

❒Messages you receive using this function are marked “SEP” on all reports.

A Dial the fax number using the number keys.

B Press [Adv. Features].

46