Microsoft 2045 Advanced Features, Press Adv. Features Select SUB Code Press TX SUB Code

Advanced Features

Advanced Features

SUB Code

Normally you can only use Confiden- tial Transmission to send messages to fax machines of the same manufactur- er that have the Confidential Recep- tion function. See p.7 “Confidential Transmission”. However, if the other machine supports a similar function called “SUB Code”, you can send fax messages to the other party using this method instead.

Note

❒The ID can be up to 20 digits long.

❒You can enter numbers, *, #, and spaces to program an ID.

❒Make sure the number of digits in the ID matches the specification of the machine to which you are sending.

❒You can store IDs in Destination lists and Programs. See "Register- ing a Fax Destination", General Set- tings Guide. See p.113 “Registering and Changing Keystroke Pro- grams”.

❒Messages you send using this function are marked “SUB” on all reports.

A Place the original, and then select the scan settings you require.

B Dial the fax number using the number keys.

C Press [Adv. Features].

D Select [SUB Code].
	4

E Press [TX SUB Code].

F Enter a SUB code, and then press [OK].

"SUB Code" appears one line above [Adv. Features] on the dis- play.

Note

❒If you make a mistake, press

[Cancel] or the {Clear/Stop} key before pressing [OK], and then try again.

To cancel entering a SUB code, press [Cancel]. The display returns to that of step E.

G To enter a password, press [Pass- word (SID)].

H Enter the password with the number keys, and then press [OK].

45