Microsoft 2045 appendix Reception Time, Two-Sided Printing

Printing Options

Reception Time

You can have the date and time print- ed at the bottom of the message when it is received. You can turn this func- tion on or off using Reception Setting. See p.132 “Reception Setting”.

Note

❒When a received message is print- ed on two or more sheets, the date and time is printed on the last page.

❒The date and time when the mes- sage was printed can also be re- corded on the message. If you need this function, contact your service representative.

Two-Sided Printing

The optional duplex unit is required.

You can have a received message printed on both sides of a sheet. You can turn this function on or off using Reception Setting. See p.132 “Recep- tion Setting”.

Limitation

❒To use this function, all pages of the received document must be of the same size—inform the sending party of this beforehand if neces- sary. You must also have paper set in your machine of the same size as that sent by the sending party. In

Two–Sided Printing, this machine will correctly receive in A3L, B4

JIS (Japanese Industrial Stand-

ard)L, A4KL, B5 JISKL, A5KL(11"⋅17"L, 81/2"⋅14"L, 81/2"⋅11"KL, 81/2"⋅51/2"L). The following table shows the results that can be achieved when receiv- ing with this machine.

5

❒This function works only when all pages are of the same width and received into memory.

❒This function cannot be used with Combine two originals.

85