Other Transmission Features

Manual Dial

The external telephone is required.

Pick up the handset of the external telephone and dial. When the line is connected and you hear a high- pitched tone, press the {Start} key to send your fax message. If, on the oth- er hand, you hear a voice at the other end, continue conversation as nor- mal.

4

Limitation

This function is unavailable for the

optional extra G3 interface unit.

The result of a transmission with Manual Dial is not mentioned in the Transmission Result Report (Immediate Transmission).

A Place the original, and then select the scan settings you require.

Reference

p.11 “Placing Originals”, Fac- simile Reference <Basic Features>

p.27 “Scan Settings”, Facsimile

Reference <Basic Features>

B Pick up the external telephone.

You will hear a tone.

C Dial.

Note

If you make a mistake, replace the external telephone, and then try again from step B.

D When the line is connected and you hear a high-pitched tone, press the {Start} key to send your fax message.

Note

If you hear a voice, tell the re- ceiver that you want to send them a fax message (ask them to switch to facsimile mode).

E Replace the handset of the exter- nal telephone.

After transmission, the standby display appears.

Note

If you want to cancel a transmis- sion, press the {Clear/Stop} key, and then remove the originals.

The machine immediately dials the destination.

52

Page 64
Image 64
Microsoft 2045 appendix Manual Dial, Pick up the external telephone, Replace the handset of the exter- nal telephone