Other Transmission Features

With Transfer Requests set in the System Settings

You can program a Quick Dial key with Transfer Station and/or End Re- ceiver using the Transfer Request function in the System Settings. See the General Settings Guide.

A Place the original down, and then select the desired settings.

 

Reference

4

p.11 “Placing Originals”, Fac-

simile Reference <Basic Features>

p.27 “Scan Settings”, Facsimile

Reference <Basic Features>

B Press the key programmed with Transfer Request.

-Setting Multistep Transfer

Register a Transfer Station in a Desti- nation list. When receiving a transfer request that specifies the same End Receiver as programmed in the Desti- nation list, this machine sends a trans- fer request to the programmed Transfer Station. This function allows fax messages to be transferred via multiple stations and makes fax mes- sage transfer more efficient.

You can program up to 30 End Re- ceivers per Transfer Station. For more information, contact your service rep- resentative.

C Press the {Start} key.

50

Page 62
Image 62
Microsoft 2045 appendix With Transfer Requests set in the System Settings, Press the key programmed with Transfer Request