Operating the Smart 108/116 IP Switching System Locally
Upgrading the Smart 108/116 IP Firmware
Complete Firmware Package – This includes the firmware for all Smart switches and RICCS and ROCS.
Firmware Package for Smart Switch models – This includes the firmware for all Smart switches.
Smart CAT5 Switch Firmware – There are multiple hardware versions of Smart CAT5 Switch units, each with version specific firmware. On the Web page, find the description and table that identifies your version.
Firmware Package for RICC and ROC models – Download a firmware package for RICC and ROC models (see the table on the Web page for the supported RICC/ROC models). Or, search for and download the specific RICC/ROC models with the correct firmware version.
6.3.2Update Software System Requirements
The following are the Update software system requirements:
Pentium II class computer with 256 MB RAM and 10 MB free hard drive space
Free Serial port
Windows 2000 or later
6.3.3Connecting the Smart 108/116 IP System
To update the firmware, the Smart 108/116 IP system must be connected and switched on.
6.3.4Connecting the RS232 Download Cable
To run the Update software, you must connect the RS232 Download cable (p/n 5CB40419) to the computer containing the software, and to the Smart 108/116 IP Switch Flash port.
User Guide 73
