Reference Guide for the Model RP114 Web Safe Router
1-2 Introduction
– Powerful packet filtering capabilities
– Incomingport forwarding and DMZ for specific services
• Built in 4-port 10/100 Mbps Switch
– AllowsLAN connectionsat 10 megabits per second (Mbps) or 100 Mbps
– Autosensingfor Ethernet (10BASE-T) or Fast Ethernet (100BASE-Tx) transmissions
– Auto UplinkTM(autosensing MDI/MDIX) configures each port for normal or uplink
connection
– Half-duplexor full-duplex operation
• Ethernet connection to a wide area network (WAN)device, such as a cable modem or DSL
modem
– RJ-45interface allowing connection to a 10BASE-T device
• Protocol Support
–IProuting
– Dynamicextended Network Address Translation (NAT+)with port forwarding for
operation with a single static or dynamic IP a ddress
– DynamicHost Configuration Protocol (DHCP) server for dynamically assigning
network configurationinformation to PCs on the LAN
– DHCP clientfor dynamically obtaining configuration information from the Internet
ServiceProvider (ISP)
– DNS Proxy for simplifiedconfiguration
– PPP over Ethernet(PPPoE) support
• Login capability
Automatically executes user login for
– RoadRunnercable modem service,
– PPP over Ethernetaccounts, PPTP login (for European service providers)
– BigPondservice (for Telstra Australia)
• Easy installation and management
– Easy,web-based setup for configuration of most features
– Built-in Manager interface for configuration of adv anced features, accessible by
TelnetProtocol